Honeywell’s industrial flame monitoring products are suited for heavy industry uses, and work in tough environments such as: industrial boilers, cement or lime kilns, Claus reactors, thermal oxidizers, gas turbines and multiple burner applications.

Honeywell IRIS P522

P522 signal processors amplify and condition the viewing head signal for a burner management system. Provides 0/4-20mA output signal, 2 SPDT flame relay outputs and 1 SPDT self-check relay output. Connect 2 S55xB/BE viewing heads and channel toggle.

Features

  • 2 channels
  • Integrated keypad
  • 0/4-20mA output
  • Two SPDT flame relay outputs and one SPDT self-check relay output
  • FM and CSA approved
  • Flame failure response and time delay on set-up
  • Connect 2 viewing heads, monitoring 1 at a time
  • Independent configuration for each viewing head
  • 2 sets of configuration data per viewing head
  • Viewing head temperature indication
  • Modbus and RS422 protocol compatible
  • NEMA 1 Enclosure Rating
Product Specification
  • APPLICATION: Signal Processor with 2 channels and keypad
  • DIMENSIONS (IN.): 4.3 in. wide x 6.4 in. deep x 6.7 in. high
  • DIMENSIONS (MM.): 109 mm wide x 162 mm deep x 170 mm high
  • USED WITH: CS550B, CS552B, CS556B Viewing Heads
  • MOUNTING: Cabinet mounting tabs
  • ELECTRICAL RATING: 22-26 Vdc
  • APPROVALS, CANADIAN STANDARD ASSOCIATION: Approved
  • REQUIRED COMPONENTS: Ultraviolet and/or Infrared Flame Detector
  • APPROVALS, FACTORY APPROVED: Approved (Temperature Range 32 to 122 F; 0 to 50 C)
  • OUTPUT: 4-20mA
  • KEYPAD: Integrated
  • STATUS MONITORING: LEDs
  • COMMUNICATIONS: ModBus and RS422 Compatible

Honeywell IRIS S550BE

The S550B/BE is a UV/IR viewing head/flame detector. It monitors the UV and IR components and has two displays, quick disconnect plug, or pipe fitting connection, UV and IR gain settings, IR high pass filter selection, flame on/off settings and a NEMA 4X/IP67 enclosure rating.

Honeywell’s industrial flame monitoring products are suited for heavy industry uses, and work in tough environments such as: industrial boilers, cement or lime kilns, Claus reactors, thermal oxidizers, gas turbines and multiple burner applications.

Features

  • Immune of X-Rays and Gamma Rays
  • Mount in any orientation
  • IR gain selection of 0-699, adjusted through signal processor
  • UV gain selection of 0-99, adjusted through signal processor
  • 2 digital displays
  • Quick disconnect plug or 1/2 in. NPT pipe fitting connection with pigtail
  • Parameters stored in signal processor EEPROM
  • Ultraviolet and infrared embedded sensors
  • Ambient Temperature: -40F to +158F (-40C to +70C)
  • 22-26 VDC supplied by signal processor
  • NEMA 4X / IP67 Enclosure

Product Specification

  • APPLICATION: Flame Detector
  • DIMENSIONS (IN.): 4.1 in. wide x 8.1 in. deep x 5.4 in. high
  • DIMENSIONS (MM.): 104 mm wide x 206 mm deep x 137 mm high
  • USED WITH: RP532A, RP532D, RP531A, RP531D, RP522A, RP522D Signal Processors
  • ELECTRICAL RATING: 22 to 26Vdc from signal processor
  • APPROVALS, CANADIAN STANDARD ASSOCIATION: Approved
  • ELECTRICAL CONNECTIONS: Quick disconnect plug
  • APPROVALS, FACTORY MUTUAL: Approved
  • AMBIENT TEMPERATURE RANGE (F): -40 to 158 F
  • AMBIENT TEMPERATURE RANGE (C): -40 C to +70 C
  • APPROVALS, OTHERS: IEC: Approved
  • NEMA RATING: 4X
  • SIGHT PIPE (NPT): 1 in.
  • PURGE AIR PIPE(NPT): 1/2 in.
  • SHUTTER: Electronic of IR only
  • UV GAIN ADJUSTMENT: 0-99
  • IR GAIN ADJUSTMENT: 0-699
  • DIGITAL DISPLAYS: Yes (2)
  • ENVIRONMENTAL, ELECTRICAL OR INGRESS PROTECTION RATING: IP67

Honeywell IRIS S556

The S556 viewing head/flame detectors feature a digital display, quick disconnect plug, gain setting, flame on/off settings for added discrimination and NEMA 4X/IP67 enclosure rating. Perfect for difficult sighting and multiple burners.

Features

  • Immune of X-Rays and Gamma Rays
  • Mount in any orientation
  • With Digital display
  • Quick disconnect plug
  • Ambient Temperature: -40F to +158F(-40C to +70C)
  • 22-26 VDC supplied by signal processor
  • Enclosure NEMA 4X / IP67 Certified
  • Used with RP532A, RP532D, RP531A, RP531D, RP522A, RP522D signal processors

Product Specification

  • APPLICATION: Flame Detector
  • DIMENSIONS (IN.): 4.1 in. wide x 8.1 in. deep x 5.4 in. high
  • DIMENSIONS (MM.): 104 mm wide x 206 mm deep x 137 mm high
  • USED WITH: RP532A, RP532D, RP531A, RP531D, RP522A, RP522D Signal Processors
  • ELECTRICAL RATING: 22 to 26Vdc from signal processor
  • APPROVALS, CANADIAN STANDARD ASSOCIATION: Approved
  • ELECTRICAL CONNECTIONS: Quick disconnect plug
  • APPROVALS, FACTORY MUTUAL: Approved
  • TYPE: UV Viewing Head with Digital Display
  • AMBIENT TEMPERATURE RANGE (F): -40 to 158 F
  • AMBIENT TEMPERATURE RANGE (C): -40 C to +70 C
  • APPROVALS, OTHERS: IEC: Approved
  • NEMA RATING: 4X
  • SIGHT PIPE (NPT): 1 in.
  • PURGE AIR PIPE(NPT): 1/2 in.
  • UV GAIN ADJUSTMENT: 0-99
  • DIGITAL DISPLAYS: Yes (1)
  • ENVIRONMENTAL, ELECTRICAL OR INGRESS PROTECTION RATING: IP67

Honeywell IRIS S806

The compact viewing head/flame detector, detects the presence or absence of flame and features a quick disconnect plug with 2 embedded indicator LEDs, 15-foot cable, mounting block with over center latches, 1-9 gain setting and flame on/off settings.

Features

  • 2 channels
  • Mounts in any orientation
  • Gain setting 1-9
  • Quick disconnect plug with embedded indicator LEDs and 15-foot cable
  • Ambient Temperature rated: -40F to +185F (-40C to +85C)
  • 22-26 VDC supplied by signal processor
  • NEMA 4X / IP67 with tightened connector and UV cable protection Certified

Product Specification

  • APPLICATION: Flame Detector
  • DIMENSIONS (IN.): 1.8 in. wide x 9.2 in. deep x 1.8 in. hig
  • DIMENSIONS (MM.): 46 mm wide x 234 mm deep x 46 mm high
  • USED WITH: P532AC, P532DC, P531AC, P531DC, 700ACSP, 700DCSP signal processors
  • MOUNTING: Any orientation
  • ELECTRICAL RATING: 22 to 26Vdc from signal processor
  • APPROVALS, CANADIAN STANDARD ASSOCIATION: Certified
  • ELECTRICAL CONNECTIONS: Quick disconnect plug
  • APPROVALS, FACTORY MUTUAL: Approved
  • TYPE: UV Compact viewing head with 15-foot cable
  • AMBIENT TEMPERATURE RANGE (F): -40 to 185 F
  • AMBIENT TEMPERATURE RANGE (C): -40 C to +85 C
  • NEMA RATING: 4X
  • SIGHT PIPE (NPT): 1/2 in.
  • PURGE AIR PIPE(NPT): 1/4 in.
  • SHUTTER: Electronic
  • UV GAIN ADJUSTMENT: 40552
  • ENVIRONMENTAL, ELECTRICAL OR INGRESS PROTECTION RATING: IP67

Honeywell IRIS Watchdog III

S256B is a UV flare stack viewing head/flame detector, that detects the presence or absence of flame at the flare stack tip. Used for continuous UV flare stack monitoring to ensure no unburned toxic or waste gas releases into the atmosphere.

Features

  • Immune of X-Rays and Gamma Rays
  • Solar blind
  • Electronic UV shutter
  • Ground mounted, up to 1000 feet away from flare stack tip
  • UV gain selection of 0-99
  • Digital display
  • Quick disconnect plug
  • Easy to install with no plant shutdown
  • NEMA 4X / IP67 enclosure rating
  • Ambient temperature: -40F to +140F (-40C to +70C)
  • 22-26 VDC supplied by signal processor
  • CSA Approved
  • Used with RP222A signal processor

Product Specification

  • APPLICATION: Flame Detector
  • DIMENSIONS (IN.): 3.7 in. wide x 20.3 in. deep x 13.7 in. high
  • DIMENSIONS (MM.): 94 mm wide x 516 mm deep x 348 mm deep
  • USED WITH: RP222A Signal Processor
  • MOUNTING: Ground Mounted
  • ELECTRICAL RATING: 22 to 26Vdc from signal processor
  • APPROVALS, CANADIAN STANDARD ASSOCIATION: Approved
  • AMBIENT TEMPERATURE RANGE (F): -40 to 140 F
  • AMBIENT TEMPERATURE RANGE (C): -40 C to +60 C
  • NEMA RATING: 4X
  • UV GAIN ADJUSTMENT: 0-99
  • DIGITAL DISPLAYS: Yes (1)
  • ENVIRONMENTAL, ELECTRICAL OR INGRESS PROTECTION RATING: IP67

Honeywell Home Page